Ultrasonic Pond Fogger Mist Maker 12 Head for Water Fountain and Halloween Decoration

Product Description

1 Pond Decoration 2 Plant Moisturizing 3 Industry Humidification 4 Reptile Humidification 5 DIY Humidifier

SIMPLE USE & SAFE USE - Simple Tips for Maximum Efficiency and Safety

NOTE: The machine is safe and simple to use, but there are some safety issues associated with using the machine irregularly or excessively. In order to use the machine more effectively and safely, please try the following tips as much as possible. These simple tips will greatly ensure safety and increase the machine's lifespan.

Tip01: Please do not place the Transformer and other Cable Connecting Parts into the water!

Tip02: The Mist Making Board works best in about 2.75inch/7cm water depth. When the water is deeper than 3.9inch/10cm, please use a buoy. Please pay attention to the model when choosing a buoy. It is best to use tap water without essential oil.

Tip03: Please do not use the mist maker for more than 10 hours a day, as working overload will shorten the service life.

Tip04: The degradation of the ceramic discs will cause water leakage, please clean the ceramic discs with a cloth regularly (depending on the frequency of use) and replace them with new discs in time.

Tip05: When replacing the ceramic discs, please ensure the cavity is dry, and tighten the ring to prevent loose accessories resulting in water leakage.

Tip06: If you have problems with the products or have any questions, please let us know.

What is the ultrasonic frequency?

Mxmoonant's entire series of mist makers use 1.7MHz ultrasonic frequency.

Is it possible to control the amount of fog emitted?

The ultrasonic fogger adopts a constant mist output, and the mist output cannot be adjusted in any way.

Can the range of the water mist be controlled?

Under normal circumstances, the humidification range of the pond fogger is small. If you want to extend the humidification range, you can add a fan to blow the mist out of the container.

Can one power supply connect multiple mist maker boards?

No, the power of a single power supply cannot satisfy multiple mist maker boards.

12 Head Mist Maker More Mist Maker Models 8400ml/H Maximum Evaporation 7000ml/H 32.38.55.2cm Size 288.55.2cm 400W Power Supply 400W 110V, US Plug Voltage 110V, US Plug Package with Float Package with Discs

8400ml/H Maximum Evaporation 4200ml/H 32.38.55.2cm Size 188.55.2cm 400W Power Supply 250W 110V, US Plug Voltage 110V, US Plug Package with Float Package with Discs

10 Head Mist Maker 6 Head Mist Maker Learn More Learn More From the brand

Decorate Your Pond Mxmoonant Ultrasonic Mist Maker Fogger

Professional: single/3/6/10/12 Heads Ultrasonic Mist Maker, different models meet your different needs. Easy to Operate: Connect the power cord, and put the mist maker head into water, then it works. Widely Applications: It is suitable for fountain ponds, fish tanks, sinks, and large pots.

[Effective Ultrasonic Mist Maker 12-head Mist Spray] The Mist Spray has been updated for higher efficiency, with a maximum of 12 spray heads, the spray volume can be up to 8400ml/H. The mist maker fogger is crafted by food-grade 304 stainless steel, featured with high strength, corrosion resistance, and good durability. It prevents limescale, and can be used for a long time. It works well within water temp of 5-45°C. A buoy float is provided for necessary need when the water level is deep.

[Precise Capacitive Sensing Head] 12 heads are in a design of independent lines, not affecting each other. The fog humidifier stops working when the water is running out. It operates on electronic over-frequency oscillation, at a safe frequency of 1.7MH, beyond the human hearing range, with no harm to humans and animals. We provide an extra 10 ceramic discs for replacement, 22 (12+10) are included in the package.

[400W Power Supply] Different from the 250W power supply on the market, our atomizer is equipped with a 400W IP67 waterproof transformer. This 400W power supply is IP67 waterproof, professionally cased, and works well in wet mist environments, though it should not be immersed in water.

[Function Overview] In the process of ultrasonic atomization, the pond fog machine will release a large amount of negative ions, combined with the smoke and dust floating in the air, it can effectively remove harmful substances and odors such as smoke, carbon monoxide, bacteria, etc. Ultrasonic technology produces water mist, dripping plant essential oil in water and the scent will radiate with the mist, filling the room with fragrance.

[Wide Applications] The fog maker can be used for decoration, creating a special atmosphere for stage, artificial landscapes, gardens, and festivals like Halloween. It can also provide proper humidity for carnivorous plants, mycology, mushroom chambers. Additionally, it can be DIY-ed into a humidifier.

product information: