AGPTEK Mini Mist Maker for Halloween, Christmas and Holidays

Specifications:

1. Mist Maker Size: 4.6 cm diameter, 4.2cm tall
2. Material: Aluminum
3. Aerosolized amount: 300-400ml/H
4. Disc: 1.5cm
5. Output Voltage: 24V DC
6. Comes with a US AC/DC adapter
7. Input: 110-250V, 50/60Hz
8. Output: DC 24V, 700mA
9. Cable Length: 210 cm (82 inch) (90cm attached to adapter, 120cm attached to mist maker), 3.5mm in diameter

Points for Attention: 1. When the switch is turned on, do not turn over the Mist Maker; keep it upright, or it may damage the atomizer. 2. Ensure that the daily running time is less than 10 hours to avoid shortening the life of the atomizing slice. 3. Do not touch the atomizing slice while the Mist Maker is working. 4. Use high-quality water, such as clean tap water, as water quality deterioration may influence the lifetime of the product. 5. Switch off the power before movement or maintenance. 6. The atomizing slice is consumable, with a service life of ≥3000 hours. If a marked reduction of mist is present, please clean the atomizing slice with a cotton swab (no need for detergent) and keep it clean.

Note: 1. For optimal performance, the water injection mouth should be 2-3 cm above the nozzles. Please use a higher container to prevent water from splashing out. 2. Avoid touching the top of the atomization when in use, as it may produce a similar feeling of electric shock due to the frequency exceeding the body's normal tolerance range, but this is not electric leakage. 3. If the new product has water stains or dirt, please contact customer service.

Package included: 1 x Mist maker 1 x AC-DC adapter (US plug)

Wide Range of Application: Mist maker can add a stunning mist effect to your pond, rockery, or water tank. Perfect for use in fish tanks, small indoor or outdoor fountains, vases, birdbaths, etc., and it will add a little magic to Halloween decorations.

Safety & Easy to Use: Please keep the item 3-4cm under the water level and plug in the power supply to create mist. When the item is short of water during operation, it will be powered off automatically, ensuring safety and reliability.

Important Note: Ensure the water is of high quality, using clean tap water, as water quality deterioration may influence the lifetime of the product.

Easy to Operate: Simply put in the water and connect to a 24V power source to produce mist. No heat or chemicals are used. Note: It is recommended to clean the fogger disc due to the dirt produced by water quality affecting the product's performance.

Environmental Protection: Our humidity fogger can provide mist with an aerosolized amount of ≥400mL/H. Note: Use in containers larger than 30 cm in diameter for better fogger effect.

product information: